Details for DDEntity "5044 - Product Placement Marker"
| 5044 - Product Placement Marker Request changes |
|---|
| Definition | This DDI shall mark a position, where a countable product was placed on the field. It shall be sent once, when the product is placed on the field. The value depends on the type of product: 0 - None 1 - Unknown 2 - Square Bale 3 - Wrapped Square Bale 4-102: Reserved for Square Bale specific Products 103 - Round Bale 104 - Wrapped Square Bale 105 - 202 Reserved for Round Bale specific Products 42 - Pile e.g. for potatoes 42 - etc. Reserved |
|---|---|
| Comment | If this DDI is supported, it shall be part of the Default Set of a machine using an on change trigger. It shall be sent whenever a product or a groupable package of products is placed on the field. For systems having trouble sending the same value multiple times, a 0 can be sent after the actual value was successfully transmitted. |
| Typically used by Device Class(es) |
-
Not Assigned 0 - Non-specific system 1 - Tractor 2 - Primary Soil Tillage 3 - Secondary Soil Tillage 4 - Planters /Seeders 5 - Fertilizer 6 - Sprayers 7 - Harvesters 8 - Root Harvester 9 - Forage harvester 10 - Irrigation 11 - Transport / Trailers 12 - Farmyard Work 13 - Powered Auxilary Units 14 - Special Crops 15 - Municipal Work 17 - Sensor System 18 - Reserved for Future Assignment 19 - Timber Harvesters 20 - Forwarders 21 - Timber loaders 22 - Timber Processing Machines 23 - Mulchers 24 - Utility Vehicles 25 - Slurry Applicators 26 - Feeder / Mixer |
|---|
| Unit Symbol | not defined - |
|---|---|
| Bit Resolution | 1 |
| SAE SPN | |
| CANBus Range | 0 to 2147483647 |
| Display Range | 0 to 2147483647 |
| Submit Date | 2016-06-06 |
| Submit By | Frank Wiebeler |
| Submit Company | Maschinenfabrik Bernard Krone |
| Revision Number | 1 |
| Current Status | ISO-Published |
| Status Date | 2019-05-30 |
| Status Comments | Status was published |
|
|
|
|
2019-05-30: ISO-Published
Status was published
2016-06-06: Request Pending
|